Klantbeoordelingen voor CUT-40F Inverter Plasmasnijder Plasmasnijder 40Amp HF Ontsteking

Prijs/kwaliteit verhouding is goed, machine is krachtig. De kast is slecht geisoleerd, waardoor elektrische apparatuur,rondom de plasma snijder, mankementen vertoont. Echter stond er in de beschrijving dat de machine Pilot arc heeft, dit is dus niet het geval!

Works in perfectValue for money

Cracking value for money, does what it says on the tin. Came with a euro plug so that got chopped off and replaced with a three pin and didn't come with a compressor nozzle but fortunately, I had a few knocking about.

As a complete novice at plasma cutting I decided to try this one. I could probably have got cheaper on e-bay or others but for this sort of thing it is worth the extra as it is easier to return it if it proves faulty.The power lead is a joke at just 1.4 metres long so I replaced it with ba nice long heavy duty lead with a 32amp plug. I installed a 32amp socket in the shed so I will have no power problems and gave it a try.Thin sheet, which is what I got it for is a doddle. It did a good job on various thicknesses and managed a decent cut on its stated maximum recommended 10mm despite my lack of skill! It really didn't like an old chunk of 14mm but it tried hard, I think it lacked air pressure to clear the slag as it stuck to the bottom and wouldn't let go.I have tried it on about a dozen cuts with different thicknesses and the tip is still fine despite it not being a pilot arc machine so no complaints there. All in all I am very happy with it.

Seems to work well after curing the air leak on the air regulator, did not get the make pictured in ad but another brand. ( More than likely all the same apart from the badge ) Also no bag included as in picture for keeping the plasma gun lead and earth lead in.Overall appears to be fine for DIY use.

Works well, need to be aware that for full power it will require a 32amp connection.

Could not believe it’s capability for the price and it does exactly what is says on the tin couldn’t recommend enough

Fantastic piece of kit, it works perfectly. A small unit with big punching power. Worth every penny.

Snel geleverd en goed verpakt. Capaciteit redelijk, maar de 12mm zoals opgegeven in manual lukt niet. Tot 8 mm geen probleem. Voor de prijs heel tevreden!

I ordered this plasma cutter a little while ago. It was delivered very quickly and was well packed. It was not difficult to assemble and the instructions were quite easy to follow. Although I haven't used it a great deal it does seem to work very well. I did some test cuts in mild steel about 2.5mm thick which were clean and showed very little slag. I'm sure this machine will be a very useful addition to my workshop.